BHM-79 Firmware Update Notice (v0.3.0)

New Features:
This update enables customizable P1-P4 buttons for enhanced operational flexibility.

Supported Device:
BHM-79 Wireless Hand Mic

Update Steps (Android):

1. Open the APP, select PPT/Hand Mic in "Bind New Device".

2. Power on BHM-79, press P0 twice to enter pairing mode.

3. Tap BHM-79 when it appears in the device list.

4. After "Connected" prompt, exit the device list.

5. Tap ⋮ (top-right), select BHM-79 Settings.

6. Follow the prompts to update, then configure programmable buttons.

Update Steps (iOS):

1. Open the APP.

2. Power on BHM-79, press P0 twice to enter pairing mode.

3. Tap BHM-79 in the left-side device list.

4. After "Connected" prompt, enter the settings interface.

5. Follow the prompts to update, then configure programmable buttons.

Important Operation Notice:
The current APP connection only supports button function configuration and mode switching. To enable radio control functionality, please follow these steps:

1. Actively disconnect the BHM-79 wireless hand mic from the APP

2. Re-pair the hand mic with your N-series radio

3. Radio control features will be available after successful re-pairing

Notes:

• Do not turn off the device or APP during the update.

• If the update fails, restart the device and retry.